Page 1
Quick setup guide Tru-Test XR300 or ID3000 on Te Pari Racewell HD3 and HD6...
Page 2
You still arrow to the entry you wish to change but then you key in the data using the keypad Once keyed in press the ENTER key to accept your entry and move on. Quick start guide Tru-Test scales on Te Pari Racewell HD3 and HD6 Sheep Handlers...
Arrow down to DRAFTING ENTER Press the and arrow to the tick ENTER Press the to set it DRAFTING RANGES Arrow to and press on the Keypad Quick start guide Tru-Test scales on Te Pari Racewell HD3 and HD6 Sheep Handlers...
WEIGHT RECORDING: set to Auto RESOLUTION: set to AUTO ZERO TRACK: On Net set to Press the back arrow to return to the Weighing Screen Setup Quick start guide Tru-Test scales on Te Pari Racewell HD3 and HD6 Sheep Handlers...
Page 5
Specialised Setup This displays the screen Press the blue soft key below DAMPING on the screen Arrow to START WEIGHING: and press the ENTER Quick start guide Tru-Test scales on Te Pari Racewell HD3 and HD6 Sheep Handlers...
Page 6
If using Te Pari ISL600 or Iconix loadars - To ensure accuracy when using the XR or ID3000 scales with Te Pari ISL600 or Iconix load bars the sensitivity and load bar capacities must be checked and changed if required.