Table of Contents
Advertisement
Racewell HD
SETTING UP A GALLAGHER SMARTSCALE 800
Switch the main dial to
DRAFT MENU
will display, press the
DRAFTING OFF
is usually displayed, press the
3 WAY DRAFTING
is displayed, each time you press the
cycle through the options from
Press the
soft key and set your draft limits for each gate
To change either a gate number or draft limit use the backspace button
entry, then key in the new number using the keypad
Note: Draft limits - always put the lesser value at the top and the larger value at the bottom
When done, press the
1. DRAFT MENU
will display, as you are still in set up, press the
5. COMMUNICATIONS
If not highlighted already, press the
soft key until the
CHANGE
Press the
OK
soft key to save your changes and return to the set up menu
Switch the mode select switch to
Mode select switch
Switch and scale colour may vary
Te Pari - www.tepari.com - FREEPHONE 0800 837 274
S
for set up
SELECT
DRAFTING OFF
OK
soft key
is displayed, press the
Drafter Fast
option is displayed for it
A
(automatic weight recording) and test your settings
A
M
F
S
SHEEP HANDLING SYSTEMS
soft key
MODE
soft key until
MODE
soft key it will
to
9 WAY DRAFTING
SELECT
soft key
soft key to highlight the
Off
Automatic weight recording
Manual weight recording
Fine - To weigh static loads
Set up options
18
HD3 Sheep Handler Installation Manual
to clear the existing
soft key until
Port 1
screen entry, press the
1214-V1
Hide quick links:
Advertisement
Table of Contents
