Table of Contents
Advertisement
Racewell HD
SETTING UP AN ICONIX FX41
On the FX41 you use the
setting and move to the next item, you use the up and
down arrows to change an item
ON
Turn the indicator
and press the
the small screen with prompts on your options, set each of the items as follows:
PREFIXING = OFF
WEIGHT GAIN = OFF
PERCENT = 51.0
DRAFT/EID ON LINE
AUTO-DRAFT = RACEWELL
EID = OFF
TRIGGER = EXTERNAL
BAUD RATE: 19200
DUPL. ID CHECK = OFF
MULTIPLE WEIGH = OFF
DISPLAY RELEASE = ON
ZERO TRACK = ON
UNITS = kg
Scroll through date and time and set if required
SAVED !
shows as the last option and you are done
Refer to the
DRAFT LIMITS
Press the
WEIGH MODE
Note - the
WEIGH MODE
the key for a period you are returned to the main weigh screen
DRAFT LIMITS
Press the
DRAFT LIMIT 1
DRAFT LIMIT 2
MINIMUM WT
(minimum weight) typically 0, set at 2kg it can help prevent misreads
MAXIMUM WT
(maximum weight)
DRAFT DIRECTION
select your preference from the 6 options, when its displayed its set
Press enter and you will be returned to the main weigh window, set up is complete
Te Pari - www.tepari.com - FREEPHONE 0800 837 274
ENTER
button to confirm each
SET-UP
button, The settings are displayed on
(or
ON
in older models)
chart here on how the draft zones are set from the limits
key to scroll through until
key requires quick presses to scroll through the options, if you stop pressing
button and set your preferred drafting settings for:
SHEEP HANDLING SYSTEMS
WEIGH MODE: HI-SPEED
16
HD3 Sheep Handler Installation Manual
FX41 - DRAFT LIMITS
The 2 weight parameters and
minimum and maximum weights
provide the 3 drafting zones
Minimum weight
Draft 1
Weights between minimum
weight and DRAFT LIMIT 1
DRAFT LIMIT 1
Draft 2
Weights between DRAFT LIMIT 1
and DRAFT LIMIT 2
DRAFT LIMIT 2
Draft 3
weight between DRAFT LIMIT 2
and the maximum weight
Maximum weight
is displayed
1214-V1
Hide quick links:
Advertisement
Table of Contents
