Quick User Guide Preparing The Machine; Programme Selection; Auxiliary Function Selection; Starting The Programme - Grundig GWN 49442STC User Manual

Quick User Guide
Preparing the machine
• Check if the hoses are connected
tightly.
• Plug in your machine.
• Turn the tap on completely.
• Place the laundry in the machine.
• Add detergent and fabric softener.

Programme selection

• Select the programme suitable
for the type, quantity and soiling
level of the laundry in accordance
with the "Programme and
consumption table" and the
temperature table.

Auxiliary function selection

Select the required auxiliary
functions before starting the
program. Whenever a programme
is selected, frames of the auxiliary
function symbols that can be
selected together with it illuminate.
When an auxiliary function is
selected, the inner section will
illuminate as well.

Starting the programme

• Press Start / Pause button to
start the programme.
• Programme follow-up light
showing the startup of the
programme will turn on.
C
If no programme is started
or no key is pressed
within 1 minute during
programme selection
process, the machine will
switch to Pause mode and
the illumination level of
the temperature, speed
and loading door indicator
lights will decrease.
Other indicator lights and
indicators will turn off. Once
the Programme Selection
knob is rotated or any button
is pressed, indicator lights
and indicators will turn on
again.
36

End of programme

When the programme completes,
End symbol will be displayed.
If you do not press any button for 10
minutes, the machine will switch to
OFF mode. Display and all indicators
are turned off.
When you press On/Off button, the
completed programme steps will be
displayed.

Cancelling the programme

The programme is cancelled when
the machine is turned off and on
again. Press and hold On / Off button
for 3 seconds.

Child Lock

Use Child Lock function to prevent
children from tampering with the
machine. Thus you can avoid any
changes in a running programme.
C
You can switch on and off
the machine with On / Off
button when the Child Lock
is active. When you switch
on the machine again,
programme will resume
from where it has stopped.
To activate the Child Lock:
Press and hold 2
Function button for 3 seconds.
After the countdown as „CL 3-2-1"
on the display is over „Child Lock
Enabled" appears on the display.
You can release the 2
Function button when this warning is
displayed.
To deactivate the Child Lock:
Press and hold 2
button for 3 seconds. After the
countdown as „CL 3-2-1" on the
display is over „Child Lock Enabled"
symbol turns off.
Auxiliary
st
Auxiliary
st
Auxiliary Function
st