Adjusting Temperature; Adjusting Time - Hotronix MAXX Operator's Manual

Adjusting Temperature

Press the Mode Select button in the center of the Control Panel.
The (SET) and (TEMP) lights located next to the display
will illuminate.
Press the (+) or (-) button to raise or lower the
temperature setting.
The temperature can be set from 205°F (96°C) to 430°F (220°C).
The LED Display will show changes as you make them.
Note: The temperature indicator will only display temperatures
200°F (93°C) and up.

Adjusting Time

Once you have adjusted the temperature, press the Mode
Select button again to advance to Time Mode.
The (SET) and (TIME) lights will illuminate.
Adjust the time in the same manner you adjusted
the temperature.
Select the desired time and push the Mode Select button
again to exit.
All lights will be off and the press will return to PRINT mode.
WWW.HOTRONIX.COM 7