Pre-Installation Inspection; Component Diagram; Power Supplies - Pentair SMART UV EU18-U Installation And User Manual

PRE-INSTALLATION INSPECTION

Component Diagram

Please review the component diagram below.
Unpack your UV system, and lay out the packaged
components for inspection. Please review the
information listed in this section to become familiar
with the equipment's various parts.
SMART UV Sterilizer Models:
®
Part Numbers EU18-U, EU25-U, EU40 & EU65P
SMART UV HO Sterilizer Models:
Part Numbers E50S, E80S, E120S & E150S

Power Supplies

The power supply can either be a cylinder "POD"
or a rectangle style. Below are the ballasts that are
currently used with the SMART UV line.
For SMART Lite and SMART
18W, 25W, 40W, and 65Watt Units.
20120-MV – 120VAC/240VAC 50/60 Hz
20100 – 120VAC 50/60 Hz
For SMART HO 50W, 80W, and 120Watt Units.
20105-MV – 120VAC/240VAC 50/60 Hz
For SMART HO 150W (120VAC)
202150-1 – 120VAC 50/60 Hz
For SMART HO 150W (240VAC)
202150-2 – 240VAC 50/60 Hz
SMART UV® UV DISINFECTION STERILIZER Installation and User's Guide
7