AT&T CL84200 Quick Start Manual page 2

Telephone operation
Operation Steps
Making a call Using a cordless handset:
Press PHONE or /SPEA�ER SPEA�ER -> Enter the telephone number.
Using the telephone base:
Press SPEA�ER or lift the corded handset -> Enter the
telephone number.
On-hook dialing Using a cordless handset:
(predialing)
Enter the telephone number -> Press PHONE or
/SPEA�ER SPEA�ER to call.
Using the telephone base:
Enter the telephone number -> Lift the corded handset or
press SPEA�ER .
Answering a call Using a cordless handset:
Press PHONE or /SPEA�ER SPEA�ER, or press any dialing key
(0-9, TONE or #).
Using the telephone base:
Lift the corded handset, press SPEA�ER
, or press any
dialing keys (0-9, TONE or #).
Ending a call Using a cordless handset:
Press OFF or return the handset to the charger.
Using the telephone base:
Hang up the corded handset or press SPEA�ER
Handset Using a cordless handset:
speakerphone
During a call, press /SPEA�ER SPEA�ER to switch between
handsfree speakerphone and normal cordless handset use.
Using the telephone base:
During a call, press SPEA�ER to switch between
handsfree speakerphone and normal corded handset use.
Redial Using a cordless handset:
Press REDIAL repeatedly to select the desired entry
-> PHONE or /SPEA�ER SPEA�ER to call.
Using the telephone base:
Press REDIAL repeatedly to select the desired entry
-> SPEA�ER or lift the corded handset to call.
Volume control Using a cordless handset:
Press -VOLUME to decrease or press VOLUME+ to increase
the listening volume during a call.
Using the telephone base:
Press qVOLUME to decrease or press VOLUMEp to
increase the listening volume during a call.
Call waiting Press FLASH on the handset or FLASH on the telephone
(Requires subscription base to put the current call on hold and take the new call;
from telephone
press again to switch back and forth between calls.
service provider)
Caller ID
This product supports caller ID services offered by most telephone service providers.
The telephone stores caller ID information of the last 50 incoming calls in the
telephone base. This information is common to all devices.
Missed call indicator
When a handset or the telephone base is in idle mode and has new or missed
calls, its screen shows XX Missed calls.
You can erase the missed call indicator either by reviewing the call log one by
one, or by pressing and holding CLEAR on the handset or CANCEL on the
telephone base in idle mode.
Review and dial a number in the call log
1. CID in idle mode -> q or p to scroll through the list.
2. While desired entry is displayed, press PHONE or /SPEA�ER on the cordless
handset, SPEA�ER on the telephone base, or lift the corded handset to call.
Directory
The directory can store up to 50 entries, which are shared by all system devices.
Operation Steps
Adding an entry 1. MENU.
2. q or p -> Directory -> SELECT.
3. q or p -> Add contact -> SELECT.
4. Enter a telephone number up to 30 digits -> SELECT.
5. Enter a name up to 15 characters -> SELECT.
Searching/dialing 1. DIR in idle mode.
an entry 2. Press q or p to browse through the directory, or press
the dialing keys (0-9) to start a name search.
3. Press PHONE or /SPEA�ER on a cordless handset
to call.
-OR-
Lift the corded handset or press SPEA�ER
telephone base to call.
Answering system
About answering system and voicemail
Your telephone has separate indicators for two different types of voice messages:
those left on the built-in answering system and those left at your telephone
.
service provider's voicemail. To listen to messages recorded on the built-in
answering system, refer to the Message playback section on the next page; to
listen to voicemail, contact your telephone service provider for more information.
Turn answering system on/off
The answering system must be turned on to answer calls and record messages.
Using a cordless handset:
1. MENU.
2. q or p --> Answering sys --> SELECT.
3. q or p --> Answer ON/OFF --> SELECT.
4. q or p --> On or Off --> SELECT.
When the answering system is on, the handset shows
Using the telephone base:
• Press /ANSWER ON to turn the answering system on or off. If the
answering system is turned on, it announces, "Calls will be answered." If the
answering system is turned off, it announces, "Calls will not be answered."
Message alert tone
When this feature is on, and there is at least one new message, the telephone
base beeps every 10 seconds.
Using a cordless handset or the telephone base:
1. MENU -> q or p -> Answering sys -> SELECT.
2. q or p -> Ans sys setup -> SELECT.
3. q or p -> Msg alert tone -> SELECT.
4. q or p -> On or Off -> SELECT.
Call screening
Use this feature to choose whether incoming messages can be heard over the
telephone base when they are being recorded. If you turn call screening on, you
hear the incoming message. While monitoring an incoming message, you can
answer the call by pressing PHONE or /SPEA�ER SPEA�ER on a cordless handset,
lifting the corded handset or pressing SPEA�ER
Using a cordless handset or the telephone base:
MENU -> q or p -> Answering sys -> SELECT.
1.
2. q or p -> Ans sys setup -> SELECT.
3. SELECT to select Call screening.
4. q or p -> choose On or Off -> SELECT.
Answering system (continued)
Message playback
Using the telephone base:
Press /PLAY when the telephone base is in idle mode. If there are only new
or only old messages, they are played automatically. If there are both old and new
messages, press q or p --> Play new msgs or Play old msgs --> SELECT.
Using a cordless handset:
Press MENU twice when the handset is in idle mode. If there are only new or
only old messages, they are played automatically. If there are both old and new
messages, press q or p --> Play new msgs or Play old msgs --> SELECT.
Options during playback
Feature
Adjust playback volume Press qp/VOLUME
on the
Stop playback Press
Skip to the next message Press
Repeat the message Press
Play the previous message Press
Delete the message Press X/DELETE
For more detailed instructions, please refer to the Abridged user's manual
provided in your package, or for a full set of installation and operation
instructions, refer to the online CL84100/CL84200/CL84250/CL84300/CL84350
DECT 6.0 corded/cordless telephone/answering system with caller ID/call
waiting Complete user's manual at
For customer service or product information, visit our website at
www.telephones.att.com
1 (866) 288-4268
.
ANS ON.
on the telephone base.
© 2010-2011 Advanced American Telephones. All Rights Reserved.
AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to
Advanced American Telephones, San Antonio, TX 78219.
Printed in China. Issue 5 AT&T 12/11.
On the telephone base On a handset
Press -VOLUME or
VOLUME+
/STOP Press 5
/S�IP Press 6
/REPEAT Press 4
/REPEAT twice Press 4 twice
Press 3 or DELETE
www.telephones.att.com/manuals
.
1 (800) 222-3111
or call . In Canada, dial