Appendix A - Electrical Connections, Endura Az25 To Heritage Abb Products - ABB Endura AZ25 Series User Manual

Endura AZ25 series probe
Combustion oxygen monitor
Appendix A – Electrical connections, Endura AZ25 to heritage ABB products
Refer to the following user Manuals and Fig. A.1 before making for electrical connections between Endura AZ25 products and
heritage ABB products:

Endura AZ25 probe to ZDT transmitter:

Endura AZ25 probe to ZMT transmitter:

Endura AZ25 transmitter to ZGP2 probe:
These manuals can also be downloaded from:
www.abb.com/measurement
Important. If making electrical connections between the Endura AZ25 probe and heritage ABB products, do not make
connections to the ACJC terminal block connectors in the Endura AZ25 probe head.
Fig. A.1 ACJC terminals at AZ25 probe head – not used when connecting to heritage ABB products
32
Appendix A – Electrical connections, Endura AZ25 to heritage ABB products
IM/ZDT/GP
IM/ZDT
IM/ZGP2
Endura AZ25 probe
ACJC
ACJC
OI/AZ25P–EN Rev. E