ABB Endura AZ25 Series User Manual page 28

Endura AZ25 series probe
Combustion oxygen monitor
P2 (White / Yellow)
P COM (White / Black)
P1 (White / Orange)
SV1 (White / Green)
SV COM (White / Red)
SV2 (White / Blue)
P COM
(White / Black)
P2
(White / Orange)
(White / Yellow)
Brown Blue (NOT USED)
*Connect drain from 14-core cable at AutoCal unit to the AutoCal terminal block outer SCN connector ONLY
**Connect drain from 14-core cable to the transmitter internal earth stud ONLY –
do not connect the drain to the transmitter SCN connector or the transmitter external earth
Fig. 4.6 Cable connections – 14-core cable / Endura AZ25 AutoCal unit to Endura AZ25 remote transmitter
26
Terminal connections at
Endura AZ25 AutoCal unit
Terminal block connections at
Endura AZ25 remote transmitter
SV2 SV1
(White / Green) (White / Blue)
P1
SV COM
(White / Red)
4 Electrical connections
14-core transmitter
cable connections
ACJC (Violet)
ACJC (Grey)
Cell + (Red)
Cell – (Black)
T/C + (Green)
T/C – (White)
SCN (Screen)*
Brown Blue (NOT USED)
Cell + (Red)
Cell – (Black)
ACJC (Violet)
ACJC (Grey)
T/C + (Green)
T/C – (White)
NOT USED –
SCN (Screen)
Connect drain at Endura AZ25
transmitter end to internal earth stud only**
OI/AZ25P–EN Rev. E