Name Of The Buttons On The Tool Bar; Execution Of The Commands; Status Display Of Icons - Sanyo PJ MASTER POA-PJNM01 Owner's Manual

Chapter 3 Basic operation
Server icons
Projector icons
PDP icons
18

Name of the buttons on the tool bar

The following commands are assigned to the buttons on the tool bar.
PJ Global setting
PDP Global setting
Button
PJ global setting
PDP global setting
Status
Alert
Error log
Alert log
Command history
* To switch tool bar display on or off, select Tool bar from Display menu.

Execution of the commands

The PJ Master provides some kinds of ways to execute the commands.The PJ Master executes the
command assigned to the bottons on the tool bar, or command on the menu, or command on the
popup menu appeared by right-clicking with a mouse button.

Status display of icons

Displays icon according to the target condition or server condition
Icon Condition
Server
Gray Displays the sub server and targets linked to this server operate in normal
Red Displays the target linked to this server has an alert
Blue Displays number of the disconnected targets placed under this server exceeds
defined disconnect number (p.20)
Target
Gray Displays the target operates in normal
Red Displays the target has an alert.
Blue Displays number of the disconnected targets placed under the server exceeds
defined disconnect number (p.20)
* Top server icon displays red if one of the servers or targets in the network has an error.
Status Error log
Alert
Operation
Displays projector global setting window. (p.31)
Displays PDP global setting window. (p.31)
Displays selected target status on the status window (p.35)
Lists existing alert events on the alert window (p.36)
Lists error events on the error log window (p.36)
Lists alert events on the alert log window (p.38)
Lists command history on the history log window (p.40)
Command history
Alert log