Customizing The Command List; Define File For Projector - Sanyo PJ MASTER POA-PJNM01 Owner's Manual

Chapter 4 Advanced setting
46

Customizing the command list

The available commands in the Global Setting menu are defined by the text file "Define_PJ.def "
for projector or "Define_PDP.def " for PDP monitor.They are located on folder "Program" in folder
"PMS".When you change the TEXT(command) on the Global Setting window, this file will be updat-
ed automatically. If you want to add new commands, edit this file depending on your environment.
Define file for projector
The default setting in the "Define_PJ.def " file is described as follows;
[GROUP LIST]
COUNT = 15
GROUP1 = POWER
GROUP2 = VOLUME
GROUP3 = MENU
GROUP4 = DATE
GROUP5 = TIME
GROUP6 = SCREEN
GROUP7 = BLUEBACK
GROUP8 = DISPLAY
GROUP9 = LOGO
GROUP10 =PMANE
GROUP11 =PJNAME
GROUP12 =SMTP
GROUP13 =ADMINI
GROUP14 =MAIL1
GROUP15 =FANSPEED
[POWER]
SEC_MODE = EXCLUSIVE
POWER ON =C00
POWER OFF =C01
[VOLUME]
SEC_MODE
VOLUME UP
VOLUME DOWN
[MENU]
SEC_MODE
MENU ON MODE
MENU OFF MODE
[DATE]
DATE SETTING
[TIME]
TIME SETTING
[SCREEN]
SEC_MODE
SCREEN NORMAL
SCREEN WIDE
[BLUEBACK]
SEC_MODE
BLUE BACK ON
BLUE BACK OFF
= EXCLUSIVE
=C09
=C0A
= EXCLUSIVE
=C1C
=C1D
=LF DATE 2003/11/29
=LF TIME 12:00
= EXCLUSIVE
=CF SCREEN NORMAL
=CF SCREEN WIDE
= EXCLUSIVE
=CF BBACK ON
=CF BBACK OFF