Viewing The Status, Alert And Logs; Viewing The Status Of Target Or Server - Sanyo PJ MASTER POA-PJNM01 Owner's Manual

9.Tick check box next to the command name.
SCREEN WIDE CF SCREEN WIDE
10. Click OK to execute the command.
The screen mode of the projectors provided with model name "PLC-XP50" will be changed to
"Wide".
* For further details of commands and status, described on item "Predefined command list" on chapter
4 (p.49).
* If there are projectors model PLC-XP50 in the network and those projectors are in the stand-by mode
at the command executed time, that command will execute when the projector turns on.

Viewing the status, alert and logs

Viewing the status of target or server

Displays the present status of target or server in the network.
1. Select a target or server you wish to display the status.
2. Select Status from Display menu or click
will appear and all the status of the items are displayed. If there is the warning item on the target
or server in the network, the warning information is indicated as follows;
Value indicated with red
Value indicated with green :Status changed
Value indicated with blue : Alert resolved
Server status
3. Click Close to close the window.
* The display order of the items on the status screen window is according to the column order of status
list view window.To change the order, see item "Customizing the display columns" (p. 28).
* The status of the last selected target or server will be displayed when selecting multiple targets or servers.
button on the tool bar.The status screen window
: Alert occured
Viewing the status, alert and logs
Target status
PJ Master
Owner's Manual
35