Condition Setting Example - Sanyo PJ MASTER POA-PJNM01 Owner's Manual

Sanyo crt television - crt projector user manual
Table of Contents

Advertisement

Chapter 3 Basic operation
34

Condition setting example

1. Select a target on the status list view window or a server on the tree view window.
2. Click
or
button on the tool bar or select Global Setting from Projector or PDP menu.
The setting window will appear.
- The commands which are not effective to the selection are disabled.
3. Click Condition to open the condition setting window.
4. Click Add to open another setting window. Enter command and status, and set retry on or off.
Item
Setting example
Command:
CR MODELNM
Status:
PLC-XP50
Retry:
OFF
* The above condition is to check if the model name of the targets is "PLC-XP50".
5. Click OK to register a new condition command.The new command list appears in the command
condition window.
6. Repeat 4 to 5 steps for another commands.
Item
Setting example
Command:
CR0
Status:
00
Retry:
ON -- execute command "CR0" repeatedly until the status is "00".
* The above condition is to check if the power status of the targets is "Power-On".
7.Tick check box next to the command names you want to use for condition check.
8. Click OK to set the condition command.
-- only execute command once.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents