Operation Instructions - Comfort Glow ELCG 125 Homeowner's Installation And Operating Manual

OPERATING INSTRUCTION
The log set conveniently features separate controls on the side of the unit for flame effect and for
sound control.
This allows you to operate the unit in two (2) different modes:
• As a full-featured log set - both flame effect and sound on. This mode allows you to enjoy the
look of the fire along with the sound of a fire burning.
• As a visual effect - only the flame effect is on, the sound is off.
1
Main Power / Flame Effect Button:
This button supplies power to the light effect display. The light effect must be in the on position for
the sound effect to be able to work.
2
Sound Control Button:
This button controls the sound effect of the log set with a high and low volume setting. Pushing
the button once enables the sound at the high setting. Pushing the button again changes the
volume to the low setting. Pushing it a third time turns the sound off. The flame effect must be in
the on position for the sound to work.
Figure 3
2
8
1