Comfort Glow 23-800-001 Owner's Installation And Operating Instructions

Comfort glow electric fireplace insert

Advertisement

HOMEOWNER'S INSTALLATION AND OPERATING INSTRUCTIONS
C
US
Questions, problems, missing parts? Before returning to your retailer, call our
20-10-212

ELECTRIC FIREPLACE INSERT

IMPORTANT INSTRUCTIONS

PLEASE READ THIS MANUAL BEFORE INSTALLING AND USING APPLIANCE
IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY,
AN ELECTRICAL SHOCK OR FIRE MAY RESULT
CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.
INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.
customer service department at 1-800-776-9425,
8:30 a.m. –5:00 p.m. EST, Monday – Friday.
MODEL #23-800-001
WARNING!
1
Français p. 19
Español p. 39
For installation with
Comfort Glow
Fireplace Mantel
Rev.4/14

Advertisement

Table of Contents
loading

Summary of Contents for Comfort Glow 23-800-001

  • Page 1: Electric Fireplace Insert

    HOMEOWNER’S INSTALLATION AND OPERATING INSTRUCTIONS ELECTRIC FIREPLACE INSERT MODEL #23-800-001 Français p. 19 Español p. 39 For installation with Comfort Glow Fireplace Mantel IMPORTANT INSTRUCTIONS PLEASE READ THIS MANUAL BEFORE INSTALLING AND USING APPLIANCE WARNING! IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, AN ELECTRICAL SHOCK OR FIRE MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.
  • Page 2: Table Of Contents

    Replacement Parts List ........................17 Thank you and congratulations on your purchase of a Comfort Glow electric fireplace. IMPORTANT: Read all instructions and warnings carefully before starting Installation. Failure to follow these instructions may result in a possible electric shock, injury to persons, fire hazard and will void the warranty.
  • Page 3 SAFETY INFORMATION SAVE THESE INSTRUCTIONS Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any questions regarding the product, please call customer service at 1-800-776-9425, 8:30 a.m. –5:00 p.m. EST. – Friday. Read all instructions before using this appliance.
  • Page 4: Safety Information

    SAFETY INFORMATION DANGER Electrical Connection A 15-Amp, 120-Volt, 60 Hz circuit with a properly grounded outlet is required. Preferably, the fireplace will be on a dedicated circuit as other appliances on the same circuit may cause the circuit breaker to trip or the fuse to blow when the heater is in operation. The unit comes standard with a 6 ft. (1.8 m) long three wire cord, exiting the right side of the fireplace. Plan the installation to avoid the use of an extension cord.
  • Page 5 SAFETY INFORMATION Remote Control This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and Industry Canada ICES-003. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, might cause harmful interference to radio communications.
  • Page 6: Installation Instructions

    INSTALLATION INSTRUCTIONS Fireplace Dimensions Specifications Voltage 120 V AC Frequency 60Hz Heater Rating 1350W Max. Amps Width 24-1/4 in. (616 mm) Depth 9-13/32 in. (239 mm) Height 20-1/4 in. (514 mm)
  • Page 7 INSTALLATION INSTRUCTIONS Package Contents JY-3B PART DESCRIPTION QUANTITY Mounting Bracket Kit Screw (ST4) Infrared Remote Control...
  • Page 8 INSTALLATION INSTRUCTIONS The Fireplace should be located in an area: • Out of direct sunlight • Not susceptible to moisture • Away from uninsulated outside wall • At least 3 ft. (.9 m) from drapery, furniture and other combustibles Clearance to Combustibles Sides 2-27/64 in.
  • Page 9 INSTALLATION INSTRUCTIONS 1. Place the assembled mantel near a 15-amp, 120-volt grounded electric outlet. Read all instructions before using this appliance. 2. Place the insert directly in front of the mantel opening. 3. Carefully lift the insert through the center opening in the front of the fireplace. The bottom of the insert has two foam rubber strips to prevent scratching of the hearth base. Slide the insert back through the opening until the metal trim makes contact with the front of the mantel.
  • Page 10: Operation Instructions

    OPERATING INSTRUCTION The fireplace control functions can be accessed in two (2) ways: • Using the touchpad control panel, located in the upper right-hand corner of the fireplace behind the sliding control panel cover. • Using the multifunction remote control unit. The fireplace features conveniently separate controls for flame effect and for heater control. This allows you to operate the unit in two (2) different modes: • As a full-featured fireplace - both flame effect and heater are on.This mode allows you to enjoy the look of the fire along with the heat output of a heater. • As a visual effect - only the flame effect is on, the heater is off. We recommend this mode for warm weather application, when you want the ambiance of a fire, without any heat output.
  • Page 11 Fahrenheit/Celsius Display: This button displays F (Fahrenheit) or C (Celsius) depending on how the temperature mode is set. When the fireplace is first turned on, the Fahrenheit (F) temperature will be displayed. To switch from Fahrenheit to Celsius, or vise-versa, when HEATER is ON, hold HEATER CONTROL button for 10 seconds. The fireplace will remember the last temperature mode setting, and in later use, the display will start at that setting, unless power to the unit has been interrupted. Temperature/Timer Display This LED display shows the set point for the temperature and timer functions. When either of these functions is activated, the display reflects the set point for five seconds and then fades to black.
  • Page 12 OPERATING INSTRUCTION Main Power Button: This button supplies power to all the functions of the Figure 6 fireplace. The main power button must be in the ON position, either from the remote or on the touch pad for the functions to work. Timer Button: This button controls the timer ON/OFF and 10-time setting from 30 minutes to 9 hours. When the Timer is first turned on, it will come on at the shortest time setting (30 minutes).
  • Page 13: Care And Maintenance

    CARE AND MAINTENANCE Before attempting ANY maintenance: 1. Turn off power to the unit. 2. Unplug the power cord from outlet. 3. Let fireplace cool if it has been operating. Glass Information: 1. Under no circumstances should this product be operated with broken glass. 2. Do not strike or slam the glass. 3.
  • Page 14: Electric Wiring Diagram

    ELECTRIC WIRING DIAGRAM Any electrical repairs or rewiring of this unit should be carried out by a licensed electrician in accordance with national and local codes. CIRCUIT DIAGRAM Heating Indicator Flame Indicator H/M/L Fuse CIRCUIT Temperature BOARD sensor AC120V/60HZ Ember bed LED Flame LED WARNING: Disconnect power before servicing.
  • Page 15: Troubleshooting

    TROUBLESHOOTING If you have any questions regarding the product, please call customer service at 1-800-776-9425, 8:30 a.m. –5:00 p.m. EST, Monday – Friday. Problem Possible Cause Corrective Action Fireplace does 1. The fireplace is not 1. Make sure the fireplace is plugged in not operate; the plugged in. to a standard 120V outlet. ON/OFF power 2.
  • Page 16: Warranty

    WARRANTY The manufacturer warrants that your new electric fireplace is free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations. 1. This electric fireplace must be installed and operated at all times in accordance with the instructions furnished with the product. Any alteration, willful abuse, accident, or misuse of the product shall nullify this warranty. 2.
  • Page 17: Replacement Parts List

    REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-800-776-9425, 8:30 a.m. –5:00 p.m. EST, Monday – Friday. Description Ref. 23-800-001 Top panel EF23350AC Left side panel assembly EF23106AC Right side panel assembly EF23107AC Back panel EF23354AC...
  • Page 18 Printed in China...
  • Page 19 BRIARTON ELECTRIC FIREPLACE MODEL #EF5568RKD Español p. 7 Français p. 13 ATTACH YOUR RECEIPT HERE Serial Number ________________________________ Purchase Date _________________________________ Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-776-9425, 8:30 a.m. – 5:00 p.m. CST, Monday – Friday. 20-10-207 Rev.
  • Page 20 PACKAGE CONTENTS HARDWARE CONTENTS Screw Bolt Connector Dowel Qty. 4 Qty. 30 Qty. 10 Qty. 21...
  • Page 21 PACKAGE CONTENTS PART NO. PART DESCRIPTION QTY. Top Panel 20-12-589 Base 20-12-590 Left Side Panel 20-12-591 Right Side Panel 20-12-592 Front Panel 20-12-593 Bolt Connector 20-09-521 Dowel Screw Some parts and specifications may change without notice.
  • Page 22 ASSEMBLY INSTRUCTIONS Carefully remove all pieces from carton and make sure that you have all parts listed (refer to parts list on page 2-3). If you are missing parts, please call customer service at 1-800-776-9425 1. Lay the left and right side panels (C & D) face down on a clean, smooth surface.
  • Page 23 ASSEMBLY INSTRUCTIONS 4. Insert two dowels (CC) into the predrilled holes in the top edges of the assembled side panels as shown. Slip the front panel (E) over the dowels (CC) until snug. 5. Secure the front panel (E) to the assembly using four screws (DD).
  • Page 24 ONE YEAR LIMITED WARRANTY ONE YEAR LIMITED WARRANTY If within one year from the date of original purchase, this item fails due to a defect in material or workmanship, we will replace or repair at our option, free of charge. To order parts or obtain warranty service, call 1-800-776-9425, 8:30 a.m.

This manual is also suitable for:

25-900-001

Table of Contents