Mutable Instruments Plaits User Manual page 3

5/3/2018
After having turned the HARMONICS,
knob might no longer match the original value of the corresponding parameter. When this happens, the
response curve of the knob is modified to account for this discrepancy, until the position of the knob and
the parameter perfectly line up again!
SYNTHESIS MODELS
Pair of classic waveforms
Virtual-analog synthesis of classic waveforms.
HARMONICS: detuning between the two waves.
TIMBRE: variable square, from narrow pulse to full square to hardsync formants.
variable saw, from triangle to saw with an increasingly wide notch (Braids' CSAW).
MORPH:
AUX: sum of two hardsync'ed waveforms, the shape of which is controlled by
HARMONICS.
A narrow pulse or
oscillators, to get a variable square or variable saw.
Waveshaping oscillator
An asymmetric triangle processed by a waveshaper and a wavefolder. Sounds familiar? That's the same
signal processing chain as in Tides, when it runs at audio rate!
HARMONICS: waveshaper waveform.
TIMBRE: wavefolder amount.
MORPH: waveform asymmetry.
AUX: variant employing another wavefolder curve, as available in Warps.
Two operator FM
https://mutable-instruments.net/modules/plaits/manual/
TIMBRE
wide notch results in silence! Use this trick if you want to silence one of the two
Mutable Instruments | Plaits
or MORPH knob to adjust a setting, the position of the
MORPH and detuning by
3/9