Unit Description Pp17-Ii - Siemens SIMATIC PP7 Equipment Manual

Unit Description PP17-II

Unit dimensions
188
Mounting cut-out The PP17-II requires a mounting cut-out of 226 mm x 190 mm (W x H).
Note
The installation depth of the Push Button Panel is dependent on the type of
connection cable to the PLC. It does not correspond to the outer dimensions of
the unit. Ensure the cable has a sufficient bending radius.
PP7, PP17-I, PP17-II Equipment Manual
Release 06/98
www.gkbpx.com
240
224
7
53
99
204
4
32
7-1
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/