Attach Labeling Strips - Siemens SIMATIC PP7 Equipment Manual

Attach Labeling Strips

The function of all the keys on the Push Button Panel can be clearly indicated
by attaching labeling strips. Standard commercial transparent foil or even nor-
mal paper, up to a thickness of 0.25 mm, can be used for this. The labeling
strips must be inserted from the rear side of the unit in the openings provided
behind the IP65 front panel. The Push Button Panel need not be opened to do
this. If the worktop in which the Push Button Panel is less than 1 mm, the la-
beling strips can be inserted or replaced when in an assembled state. The foil or
paper labeling strips can be produced by implementing a commercially avail-
able text program and printing out on a standard printer.
The disk supplied with this document contains a directory SLIDES in which
the file SLIDES.DOC is stored. This is a text file in Word for Windows 6.0
format with which the labeling strips for the Push Button Panel can be printed
in the correct size.
Labeling strip
The following table contains the dimensional specifications for producing the
dimensions
labeling strips:
Labeling strip length
Labeling strip height
In order to ease insertion of the labeling strips, the corners can be rounded on
the insertion side.
Refer to the following figure to determine the position of the inscriptions on
the labeling strips. Please note that the diagrams are not true to scale (all speci-
fications in mm).
0
Figure 8-1 Text positions for keyboard PP7
PP7, PP17-I, PP17-II Equipment Manual
Release 06/98
www.gkbpx.com
Size
133.25 mm
36.9 60.8
PP7 PP17-I
253.0 mm
15.7 mm
84.7 108.6
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
8
PP17-II
133.25
8-1