Product Description - Siemens SIMATIC HMI KTP700F Mobile Arctic Product Information

SIMATIC HMI
KTP700F Mobile Arctic
Product Information
A5E49199858
Applicability
This product information applies to the HMI device SIMATIC HMI KTP700F Mobile Arctic with article number
6AV2145-6GB06-0AA0.
The HMI device SIMATIC HMI KTP700F Mobile Arctic is based on the following standard devices:
• Regarding the hardware and keys, electronics and interfaces, and the display:
SIMATIC HMI KTP700F Mobile, with the article number 6AV2125-2GB23-0AX0
• In relation to the enclosure:
SIMATIC HMI KTP900F Mobile, with the article number 6AV2125-2JB23-0AX0
In this documentation the respective short form for the standard devices "KTP700F Mobile" and "KTP900F Mobile" is used and
the HMI devices in general are referred to as Mobile Panels.
This product information describes the technical differences between the basic device and the standard devices. The
information in this product information takes precedence over statements in the following underlying documentation of the
standard devices:
• Overall documentation "Mobile Panels 2nd Generation" (https://support.industry.siemens.com/cs/ww/en/ps/14746/man)
• Operating Instructions "Mobile Panels 2nd Generation" (https://support.industry.siemens.com/cs/ww/en/view/109477845)
Unless otherwise described in this document, all information in the documentation of the standard devices, such as
information on hardware, operating system, software, configuration, maintenance and service, applies to the KTP700F
Mobile Arctic.
The system components mentioned in this product information are approved for the extended operating temperature range.
They can be operated together with the KTP700F Mobile Arctic, as described in the operating instructions "Mobile Panels 2nd
Generation" for the standard devices.
Note
This document belongs to the device and will also be required for repeat commissioning. Keep all supplied and
supplementary documentation for the entire service life of the device.
Pass on all of these documents to a future owner of the device.
Overview

Product description

The HMI device with glass touch screen is designed for use in weather-protected areas with low ambient temperatures, e.g.
in cooling technology.
All Mobile Panels have the same functionality and are exclusively configured with the innovative HMI software WinCC. The
engineering software is integrated into the engineering framework "Totally Integrated Automation Portal".
© Siemens AG 2021. All rights reserved
A5E49199858-AB, 02/2021
9