Connect To Network And Devices; Ethernet; Wi-Fi; Turn On/Off Wi-Fi - NEC ITX-3370-1(BK)TEL User Manual

CONNECT TO NETWORK AND DEVICES

CONNECT TO NETWORK AND DEVICES
The ITX-3370 supports a variety of network connections (Ethernet, Wi supports a variety of network connections (Ethernet, Wi-Fi) and device connections,
including EHS headset (Plantronics), USB, SD card and Bluetooth device. Users can connect the
ITX-3370and transfer files from/to the ITX

Ethernet

Ethernet connection is turned on as DHCP by default. If you would like to use Ethernet connection for Ethernet connection is turned on as DHCP by default. If you would like to use Ether
network access, please make sure the Ethernet cable is plugged in to the LAN port on the back of the network access, please make sure the Ethernet cable is plugged in to the LAN port on the back of the network access, please make sure the Ethernet cable is plugged in to the LAN port on the back of the
ITX-3370.
To configure Ethernet settings on ITX-3370
1. Go to ITX-3370's Settingsà Network
2. Touch IPv4 settings.
3. Tap on "IPV4 Address Type" to select DHCP, Static IP or PPPoE as the address type. Address Type" to select DHCP, Static IP or PPPoE as the address type. Address Type" to select DHCP, Static IP or PPPoE as the address type.
Ø For DHCP, save the setting and the For DHCP, save the setting and the ITX-3370 should be able to get IP address from the DHCP
server in the network.
Ø For static IP, enter IP Address, Subnet Mask, Default Gateway,
server for the ITX-3370 to correctly connect to network.
Ø For PPPoE, enter PPPoE account ID and password so the For PPPoE, enter PPPoE account ID and password so the ITX-3370 can get IP address from the
PPPoE server.

WI-FI

WI-FI is supported and built-in on the ITX
within the area.

Turn On/Off Wi-Fi

1. Go to ITX-3370's Settings.
2. Touch Network.
3. Check or uncheck the option for Wi
Or, users could open the top status bar and tap on WI Or, users could open the top status bar and tap on WI-FI icon

Connect to Wi-Fi Networks

1. Once Wi-Fi is turned on, ITX-3370
2. Go to ITX-3370's Settings.
lantronics), USB, SD card and Bluetooth device. Users can connect the lantronics), USB, SD card and Bluetooth device. Users can connect the
ITX-3370 using a USB connection, SD card or Bluetooth. using a USB connection, SD card or Bluetooth.
3370 LCD:
NetworkàEthernet Settings.
IP Address, Subnet Mask, Default Gateway, DNS Server and Alternative DNS
to correctly connect to network.
ITX-3370. ITX-3370 can be connected to network if Wi
Wi-Fi.
will automatically start the scanning within the range. will automatically start the scanning within the range.
ITX-3370 User Guide
Version 1.0.1.12
Fi) and device connections,
should be able to get IP address from the DHCP
DNS Server and Alternative DNS
can be connected to network if Wi-Fi is available
to turn it on/off.
net connection for
can get IP address from the
P a g e | 105