Add Contacts To Group; Contacts Storage Status - NEC ITX-3370-1(BK)TEL User Manual

Add contacts to Group

To add contacts to a group, tap on the group then tap on To add contacts to a group, tap on the group then tap on
group and press .
Note:
·
Users could also select a group for the contact when adding or editing the contact.
·
Ringtone can be assigned in group as well as single contact. If the group has ringtone set to "Custom Ringtone can be assigned in group as well as single contact. If the group has ringtone set to "Custom Ringtone can be assigned in group as well as single contact. If the group has ringtone set to "Custom
Ringtone", this ring tone has the highest priority when there is an incoming call to the contact. ingtone", this ring tone has the highest priority when there is an incoming call to the contact. ingtone", this ring tone has the highest priority when there is an incoming call to the contact.

Contacts Storage Status

The ITX-3370 default maximum contacts storage is up to 1000. To check contact storage status, tap on default maximum contacts storage is up to 1000. To check contact storage status, tap on default maximum contacts storage is up to 1000. To check contact storage status, tap on
More on the upper right corner of the contacts screen
select "Storage Status".
Figure 79: ITX-3370 Contacts - Add New Group Figure
group for the contact when adding or editing the contact.
the contacts screen
ITX-3370 User Guide
Version 1.0.1.12
, check the contacts to be added to the , check the contacts to be added to the
to bring up contacts options, scroll down , scroll down and
P a g e | 80