Features Diagram; Operation Procedure - Anvil MWA1100 Installation, Operation And Care Manual

FEATURES DIAGRAM

(continued)
FEATURES DIAGRAM
(continued)
1
1
2
2
1
5
5
2
6
6
5
8
8
6
9 9
8
0
9
10
0
q
11
q
w
12 w
1 MICROWAVE indicator, showing
microwaving in progress.
2 DEFROST indicator, showing defrosting in
1 MICROWAVE indicator, showing
progress.
microwaving in progress.
3 PERCENTAGE of power indicator.
2 DEFROST indicator, showing defrosting in
progress.
4 CHILD LOCK indicator.
3 PERCENTAGE of power indicator.
5 PROGRAM - Used to save cooking data.
4 CHILD LOCK indicator.
6 DEFROST - Used to defrost foods for time.
5 PROGRAM - Used to save cooking data.
6 DEFROST - Used to defrost foods for time.
3
3
4
4
3
4
7
7
7
7 TIME SET PAD - Used to set the cooking
time.
8 CHECK - Used to check cooking data.
7 TIME SET PAD - Used to set the cooking
time.
9 DOUBLE QUANTITY - Used to extend
programmed cooking time.
8 CHECK - Used to check cooking data.
0 POWER - Used to set power level.
9 DOUBLE QUANTITY - Used to extend
programmed cooking time.
q STOP/CLEAR - Used to stop the oven
operation or to delete the cooking data.
0 POWER - Used to set power level.
w START /+30SEC - Used to start the oven
q STOP/CLEAR - Used to stop the oven
and also used to set a reheat time.
operation or to delete the cooking data.
w START /+30SEC - Used to start the oven
and also used to set a reheat time.
10
4
10

OPERATION PROCEDURE

This section includes useful information about oven operation.
1. Plug power supply cord into a standard 3- pronged 230V~240V, 50Hz power outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray.
The glass tray must always be in place during cooking.
3. Shut the door. Make sure that it is firmly closed.
4. Set required program and time, then touch start.
5. Once cooking is complete, take care removing container as it will be hot.
1
The oven light is on when the microwave oven
is operating or the door is opened.
2
The oven door can be opened at any time
during operation by opening the door. The oven
will automatically shut off.
3
Each time a pad is touched, a BEEP will sound
to acknowledge the touch.
4
The oven automatically cooks on full power
unless set to a lower power level.
5
The display will show ":0" when the oven is
plugged in.
WATTAGE OUTPUT CHART
• The power-level is set by touching the POWER pad. The chart shows the display, the power level and
the percentage of power.
Touch POWER pad. Power Level (Display)
once 100
twice 80
3 times 60
4 times 40
5 times 20
6
When the STOP/CLEAR pad is touched during
the oven operation, the oven stops cooking and
all information retained.
To erase all information, touch the STOP/
CLEAR pad once more. If the oven door is
opened during the oven operation, all
information is retained.
7
If the START pad is touched and the oven does
not operate, check the area between the door
and door seal for obstructions and make sure
the door is closed securely.
The oven will not start cooking until the door is
completely closed or the program has been
reset.
Approximate Percentage of Power
100%
80%
60%
40%
20%
11
5