Table of Contents
Advertisement
Chapter 2) 7XG3124 Application Guide
2.9 Creating the RA24 .cid File
We know need to create a .cid file which we will use at a later stage of the IED Configuration process.
(Note: Please close and re-open Digsi System configurator before proceeding with the next step)
1. Open the Station in Reydisp Manager, go to the Network screen, select the RA24 IED, right click
and select Export IEC61850 device configuration.
Figure 38:System Configurator - .CID File
Save the file for later RA24 configuration. System configuration is now complete.
Save the file as 1S24.cid
©2014 Siemens Protection Devices Limited
Chapter 2 Page 31 of 42
Advertisement
Chapters
Table of Contents
Troubleshooting
