Installing And Replacing The Ink Cartridge; Notes On Using The Ink Cartridge - Epson TM-S9000MJ User Manual

3. Pull out some paper, and close the roll paper cover.
When the power is on, the roll paper is automatically cut.

Installing and Replacing the Ink Cartridge

Notes on Using the Ink Cartridge

❏
Read the manual included with the ink cartridge before use.
❏
When the ink cartridge is installed for the first time, the product uses ink to prepare for
printing (ink charging).
❏
Cartridge yields vary based on such usage environment and conditions.
❏
To insure print quality, some ink remains in the cartridge after the Ink LED comes on.
❏
Epson recommends the use of genuine Epson ink cartridges. The use of non-genuine ink
may cause damage that is not covered by Epson's warranties, and under certain
circumstances, may cause erratic product behavior.
❏
Do not touch the IC chip on the side of the ink cartridge.
❏
Do not remove the ink cartridge except when replacing it with a new one.
❏
Do not open the ink cartridge until you are ready to install it.
❏
After installing an ink cartridge, use it up within 6 months.
❏
Use the ink cartridge before the expiration date printed on its package and on the ink
cartridge itself.
❏
Do not puncture the convex part of the bottom of the ink cartridge or remove the
transparent film on the bottom of the ink cartridge.
❏
A used cartridge may have some ink on the convex part of the bottom of the cartridge.
Avoid touching that part to keep your hands clean.
❏
Dispose of the used ink cartridges according to the laws or regulations in your country
and region.
❏
To transport or store this product for a long period after once using this product, make
sure the ink cartridge is installed in the product.
❏
This product may automatically run maintenance operations at night or when the power
is turned on to maintain print quality. As a result of these maintenance operations, you
may need to replace the ink cartridge. In this case, replace the ink cartridge with a new
one.
10