Cabane Strut Installation - RED BARON PIZZA SQUADRON’S STEARMAN Assembly Manual

CABANE STRUT INSTALLATION.

NOTE : This is temporary steps for in-
stalling screws, so no need to tighten the
screws.. The exact position of the end will
be adjusted when the struts are installed.
1) Loacte the items for this section of the
manual.
3x12mm
2) Place the cabane struts in position, not-
ing their position as shown in the photo.
Loosely install the four M3 x 12 socket
head machine screws and M3 washers.
Leave the hardware loose so the struts
can be positioned while installing the
upper wing center rib. Make sure to use
threadlock on the screws so they won't
vibrate loose.
3x12mm
29