RED BARON PIZZA SQUADRON’S STEARMAN Assembly Manual page 18

STEARMAN 71.5 inches
3x10mm
Because of the size of the cowl, it may be nec-
essary to use a needle valve extension for the
high speed needle valve. Make this out of suf-
ficient length 1.5mm wire and install it into
the end of the needle valve. Secure the wire in
place by tightening the set screw in the side of
the needle valve.
18
Instruction Manual.
ELECTRIC POWER CONVERSION.
1) Locate the items neccessary to install
the electric power conversion included
with your model.
2) Recommend the items necessary to in-
stall the electric power conversion parts
included with your model.
- Motor: 2000 - 2700 Watts
- Propeller: 17x8 ~ 19x10
- ESC: 70A - 110A
- 8S- 10S Lipo
3) Attach the electric motor box to the
firewall suitable with the cross lines
drawn on the electric motor box and fire-
wall. Using epoxy and balsa stick to se-
cure the motor box to the firewall. Please
see pictures below.