Hinging The Rudder; Installing Vertical Stabilizer - RED BARON PIZZA SQUADRON’S STEARMAN Assembly Manual

HINGING THE RUDDER.

Glue the two rudder hinges in place us-
ing the same techniques used to hinge
the ailerons.
INSTALL RUDDER CONTROL HORN.
Repeat steps to install the rudder control
horn as same as steps done for ailerons.
Fiberglass control horn
Rudder fiberglass control horn.

INSTALLING VERTICAL STABILIZER

1) Using a modeling knife, remove the
covering from over the precut hinge slot
cut into the lower rear portion of the fu-
selage.
Epoxy.
.
23