Engine Mount Installation - RED BARON PIZZA SQUADRON’S STEARMAN Assembly Manual

STEARMAN 71.5 inches
Fuel pick up tube.
9) Connect the lines from the tank to the en-
gine and muffler. The vent line will connect
to the muffler and the line from the clunk to
the carburetor.
14
Vent tube.
Fuel fill tube.
Instruction Manual.
Blow through one of the lines to en-
sure the fuel lines have not become kinked
inside the fuel tank compartment. Air should
flow through easily.

ENGINE MOUNT INSTALLATION.

1) Locate the items necessary to install
the engine mount included with your
model.
4x30mm
2) Use four 4x30mm head bolts and four
4mm washers to attach the engine mount
rails to the firewall. Tighten the screws .
Make sure to use threadlock on the screws
to help prevent them from vibrating loose.
Thread locker glue.
.