Product Description; Delivered Equipment And Accessories; Elmasteam 3 / Elmasteam 5; Elmasteam 10 - Elma Elmasteam 3 Operating Instructions Manual

Product description

Prevention of
electrical accidents
Filling
No chemical
additions
Maintenance and
repair
3
3.1
3.1.1
3.1.2
4
Switch the unit into „stand-by" operating mode during operating
breaks. This prevents unintended activation of the steam outlet.
Do not open screw cap above 1 bar steam pressure.
In order to prevent electrical accidents and damage, do not
steam clean the unit and do not let any liquid enter the unit.
In case of any damage on the unit or if the unit has become wet
pull the mains plug.
The unit must be opened by authorized specialized personnel
only. Pull the mains plug before opening the unit.
Do not operate the Elmasteam with empty water tank as this
might cause damage to the unit!
Operate the unit with water only and observe the instructions, in
particular those on the use of the pump (Aquamatic).
Carry out the maintenance works at regular intervals as
described in the present Operating Instructions in order to
guarantee the correct functioning of the unit and to keep the
safety standard (see section 7).
Repair must be carried out by authorized specialized personnel
only. Pull the mains plug before opening the unit.
In case of damage or faulty operation please contact your
supplier or the manufacturer of the unit.
Product description

Delivered equipment and accessories

Elmasteam 3 / Elmasteam 5

•
flexible hand piece or fixed nozzle with foot-activated switch
(optional)
•
compressed air connection (inlet)
•
connection for pump „Aquamatic"
•
filling funnel
•
pincette
•
maintenance tube "M" for monthly maintenance
•
maintenance tube "J " for yearly maintenance

Elmasteam 10

as Elmasteam 3 and 5, but with 2 outlets and 3 variants:
•
2x flexible hand piece
•
2x fixed nozzle with foot-activated switch or
•
1x flexible hand piece and 1x fixed nozzle
BA/Elmasteam/GB/0306 © Elma GmbH & Co KG