Annunciator; Daa Speaker Circuit - Notifier AFP-3030 Operation Manual

Read Status

3.12 Annunciator

When an annunciator address is entered into the Point Select Screen and the ACCEPT soft key is pressed, the following screen will dis-
play if the point is a monitor module.
Display
Lines 1- 4 - This could display any current event message, or, as in this example, the System Normal message
Line 5 - Screen title and the address of the point being read.
Line 6 - Displays the annunciator mode.
Line 7 - Displays the state of the active LED.
Line 8 - Displays the state of the fault LED.
Line 10 - Displays the annunciator source(s).

3.13 DAA Speaker Circuit

When a DAA Speaker circuit address is entered into the Point Select Screen and the ACCEPT soft key is pressed, the following screen
will display.
Lines 1- 4 - This could display any current event message, or, as in this example, the System Normal message
Line 5 - Screen title and the address of the point being read.
Line 6 - Refer to the line 6 description in "Control Module" on page 39 for explanations of the messages that can appear in this line.
42
L A K E V I E W G E N E R A L H O S P I T A L
S Y S T E M N O R M A L
1 0 : 2 2 : 3 4 A T U E J A N 2 2 , 2 0 1 9
R E A D A D D R E S S : N 1 2 4 A 0 8 P 0 9
M O D E :
A C T I V E L E D :
F A U L T L E D :
S O U R C E :
Figure 3.13 Annunciator Screen - Read Status
L A K E V I E W G E N E R A L H O S P I T A L
S Y S T E M N O R M A L
1 0 : 2 2 : 3 4 A T U E J A N 2 2 , 2 0 1 9
R E A D A D D R E S S : N 0 1 2 A 2 3 S 2
A U T O M A T I C O F F
1 0 : 2 2 : 3 4 A
Figure 3.14 Speaker Point - Read Status
C O N T R O L
O F F
O F F
L 0 1 M 0 0 1 L 0 1 M 0 0 2
T U E J A N 2 2 , 2 0 1 9
AFP-3030 Operations Manual — P/N DOC-01-033:C 05/12/2018
Annunciator
B A C K
B A C K