Testing The Keypad - PTI security systems APEX Installation And Operation Manual

Testing the Keypad

Test the display by applying power to the keypad.
1
-
The default date and time should appear on the display
after power is applied.
-
The controller displays the date and time to the keypad
once a minute. The date and time on the display should
update if the keypad is configured correctly.
2 To verify that the backlight is working:
-
Press the * key. The backlight should light up and the display
will read
-
If no keys are pressed within 10 seconds, the display will
return to the
3 To test touchpad operation:
-
Press
Please
0, 1, 2, 3, 4, 5, 6, 7, 8, 9
appear on the display as it is pressed (if Secure Entry is
enabled a
-
Press the
the display will show
returned from the controller.
-
If the keypad is communicating with the controller, the
display will show either
corresponding message.
rev. 7-2017 114A3863.E
Please Enter Access Code.
Date/Time
*
the
Enter
*
for each digit appears on the display)
#
key to transmit the code to the controller,
and the backlight will shut off.
key. When
Access
Please Wait
Entry Granted
APEX Access Device
the display
Code,
. Each digit should
until a response is
or another
shows
press
23