Aanderaa 4330 Operating Manual page 43

Note! If using Tera Terminal Pro, after setting up the com port according to settings above please select
"Terminal" in the "Set up" menu and click "Local echo" also select "CR+LF" for both "Receive" and
"Transmit" under "New line".
Control, and if necessary update, the FoilID, FoilCoefA, FoilCoefB, FoilPolyDegT, FoilPolyDegO
properties accordingly to the Calibration Certificate for the sensing foil in use (refer CHAPTER 5 for
communication with the sensor).
Example of changing foil coefficients:
Set Passkey(1000)
Set FoilID(1707)
Set FoilCoefA(1.71404376E-04,3.04290906E-04,-6.39414910E-02,5.14270106E+00,-
2.84638794E-02,3.88090809E-05,-1.92200149E+02,1.66135018E+00,-5.18448297E-
03,1.22642972E-05,2.89178945E+03,-3.48247963E+01,2.03067907E-01,-1.72740886E-03)
Set FoilCoefB(1.23230336E-05,0,0,0,0,0,0,0,0,0,0,0,0,0)
Set FoilPolyDegT(1,0,0,0,1,2,0,1,2,3,0,1,2,3,4,0,0,0,0,0,0,0,0,0,0,0,0,0)
Set FoilPolyDegO(3,4,3,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)
Save
Type to verify the new coefficients.
Get All
Script files for entering the foil coefficients via text terminal programs will be available from the
factory.
1. Submerge the Optode into the aerated water. Set the
command and wait until both the temperature and the phase measurements have stabilized:
save
Set Passkey(1000)
Set Interval(30)
Save
2. Store calibration values by typing:
Set Passkey(1000)
Do CollectCalDataSat
The save command is automatically performed when you type
3. Set the CalDataAPress
Set Passkey(1000)
Set CalDataAPress (..)
Save
NOTE! For maximum accuracy do not compensate the air pressure for height above sea level.
property to the actual air pressure in hPa at the site.
page 43 of 93
TD 269 OPERATING MANUAL
OXYGEN OPTODE 4330, 4831, 4835
June 2017
Interval property to e.g. 30 seconds. Enter the
Do CollectCalDataSat.