Chapter 4 Sensor Configuration Using Real-Time Collector - Aanderaa 4330 Operating Manual

CHAPTER 4 Sensor configuration using Real-Time Collector

The sensors that are updated with Sensor Framework version 3 can be configured as stand-alone
sensors using AADI Real-Time Collector.
Open the sensor connection as described in TD268 AADI Real-Time collector operating manual.
When the connection is established you can start and stop recordings or configure the device, refer
Figure 4-1. Open Device Configuration and press Get Current Configuration. Check Include User
Maintenance to view maintenance settings. The password is 1000.
Figure 4-1AADI Real-Time Collector screen views
User accessible sensor properties are found in Deployment settings, System Configuration and User
Maintenance. Refer table Table 1-2 in chapter 1.2 for an overview of the properties. Refer chapter 5.7 for
a description of sensor properties. To edit the configuration, click in the value-field and enter new value.
Press Next to update sensor flash and store changes.
Figure 4-2, Figure 4-3 and Figure 4-4 presents screen views of AADI Real-Time Collector.
Figure 4-2 Sensor deployment settings
TD 269 OPERATING MANUAL
OXYGEN OPTODE 4330, 4831, 4835
June 2017
page 25 of 93