Formatting The Output String; Xml Commands; Scripting -Sending A String Of Commands - Aanderaa 4330 Operating Manual

5.5.3 Formatting the Output String

The property called Enable Text
(Yes) the output string includes the descriptive parameter name. When the property is set to
output parameters are presented without descriptive parameter names; the parameter order is the same,
refer Figure 5-5 for an example.
Figure 5-5 Example of output string: enable/disable text/decimal format
The property called Enable DecimalFormat
numbers (Yes), or in exponential format (No). Refer Figure 5-5 for an example.

5.5.4 XML Commands

Get ConfigXML presents the configuration of all the sensor properties in XML format.
Get DataXML presents all of the enabled parameters in XML format.

5.6 Scripting -sending a string of commands

Often it may be usefully to collect more than one command in a text file. For example the instructions
below can be written in an ordinary text editor and saved as a text file, which can be sent to the sensor. In
HyperTerminal click send text file in the Transfer menu, and select the correct file. In Tera Terminal click
"Send File" under "File" in main menu and select the file to be transferred.
controls the presentation of measured data. When the property is set to
controls the format of the output values, either as decimal
page 32 of 93
TD 269 OPERATING MANUAL
OXYGEN OPTODE 4330, 4831, 4835
June 2017
(No), the