Slide Out Compartments - Cushman REFRESHER FS2 Owner's Manual

Hide thumbs Also See for REFRESHER FS2:
Table of Contents

Advertisement

OPERATING PROCEDURES
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
B
Passenger side countertop must be removed and module clamps must be loosened before attempting module
3.
6" Pull Out Module: All 6" modules are the same size and similar weight. They have alignment dimples on the bot-
tom for positioning. To remove these modules, remove the passenger side counter top and loosen both module
clamps (refer to lock down mechanism) and gently pull the module up and out using the door handle and or top end
of module.
Make sure pull board is inside the
module with the door closed before
removing module.

Slide Out Compartments

1.
6" Pull Out Module: This module has a pull out board
inside; it is equipped with slide rails for pull out access for
cleaning and or refilling. The board inside can be removed
after the slide locks are released.
en-28
removal.
Owner's Guide
6" Pull out module
housing
Positioning dimples
located on bottom
Pull Handle
Slides for in
and out
access

Advertisement

Table of Contents
loading

Table of Contents