Table of Contents
Advertisement
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
1.
6"Cup Module: The 6" cup module is positioned by
four dimple extrusions located on the bottom of the
module. To remove these modules, remove the pas-
senger side countertop and loosen module clamps,
(refer to lockdown mechanism). Gently pull the module
up and out using the door handle and or top end of
module.
Passenger side countertop must be removed and module clamp must be loosened before attempting module
2.
12" and 18" Center Module: Both the 12"
and 18" modules are positioned by four dim-
ples on the bottom. Removal of the larger
units may require a second person to help
support the module. To slide the module out,
a slight upward force must be applied along
with a pulling force to nudge dimples free.
Once module is loose, support with both
hands.
OPERATING PROCEDURES
removal.
Owner's Guide
B
Wire cup racks
are designed to
hold cups only.
Positioning Dimples
(all four corners)
The 12" module shown
18" module has wider
spacing and shelving.
en-27
Advertisement
Table of Contents
