Slide Out Compartments - Cushman refresher fs4 Owner's Manual

Table of Contents

Advertisement

Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.

Slide Out Compartments

1.
Hanger Board: The pull out module has a hanger board
inside that is equipped with slide rails to allow for cleaning
and/or refilling. The board inside can be removed after the
slide locks are released.
2.
Slide Out Trash Compartment: The slide out trash compartment (located in the end cap) is equipped with a 10 lb.
rated latch. A pulling force exceeding 10 lbs. is required to release the latch to allow the trash can housing to slide
out of the unit.
Bins can be
lifted out for trash disposal
and cleaning purposes.
Slide trash compartment out
using handle until it stops.
Spring loaded levers need to be
raised/lowered to remove the
trash unit. These locks must
be released in order to pull
entire unit out.
OPERATING PROCEDURES
Owner's Guide
Pull Handle
Sliding Hanger
Board
Pull to release latch. When latch is
released, the trash compartment will
slide with pull or pushing force.
B
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents