Using The Tape Counter - Samsung SV-5000 Owner's Instructions Manual

Using the Tape Counter

The tape counter:
indicates the elapsed time in the play and record modes
(hours, minutes and seconds) ;
is reset when a cassette is inserted in the VCR ; and
enables you to find the beginning of a sequence easily.
To enable the remaining time to be calculated correctly,
you must indicate the type of cassette being used. See
page 22.
1
Insert a cassette in your VCR.
2
Press CLK/COUNT twice.
Result: The tape counter is displayed:
0:00:00.
The tape counter does not necessarily start from zero at the
beginning of the tape.
3
Select the required operation (play, record, fast-forward, rewind).
Result: The tape counter indicates how long the cassette has
been running.
4
To set the tape counter to zero at the beginning of a sequence:
press DISPLAY twice to display the counter ; and
press CLR/RST when you want to set the tape counter to
zero.
5
To fast-forward or rewind to the sequence at which the counter
was set to zero, simply press REW (
Result: The VCR stops automatically when the counter
reaches zero.
Some VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 17).
Press DISPLAY:
once to display the current function, program
number, recording speed, date, time and counter ;
twice to display the counter only ;
three times to display the time remaining on the
cassette ; and
four times to clear the display.
) or F.F ( ).
2
EX REC.SPEED CLK/COUNT PICTURE
STROBE
2
3
ART
PB PB DTR DTR INDEX INDEX DUB DUB
100 CLR/RST
0
REC
STOP
4
DISPLAY MONITOR
0:00:00
37
GB
TIMER
AUDIO
INPUT
Hi-Fi
P/STILL
A.DUB