Adjusting Picture Sharpness
Selecting the Audio Output Mode
The Picture Sharpness feature enables you to adjust the sharpness
of the image according to your own preferences.
During playback, press the PICTURE button.
The picture bar appears.
If you do not press a button within six seconds, the picture
bar automatically disappears.
On completion, press the PICTURE button again.
You can select the mode in which the sound is reproduced on the
LINE and AV outputs. The following options are available.
Used to listen to the sound on the left Hi-Fi channel.
Used to listen to the sound on the right Hi-Fi channel.
Used to listen to the mixed sound of the Hi-Fi and linear
audio. (For example, you can play back Hi-Fi audio sound
while at the same time listening to narration dubbed onto
the normal audio track. See pages 43 and 44 for further
details of the Audio Dubbing feature.)
Used to listen to the sound on the linear mono channel.
Used to listen to Hi-Fi stereo sound on the left and right
When playing back tapes recorded in Hi-Fi, the
sound switches to Hi-Fi after five seconds of Mono.
To select the sound mode, simply press the AUDIO button on the remote
control until the required option is displayed.
buttons until the picture is adjusted to your