Selecting The Cassette Type; Selecting The Recording Speed; Protecting A Recorded Cassette - Samsung SV-5000 Owner's Instructions Manual

GB
** USER SET1 **
¨
TAPE SELECT
CLOCK TYPE
PLAY SYSTEM
OSD
USER SET2
¨
¹
Type Recording Time
PAL/ SECAM
E-180/T120 180 mins
E-240/T160 240 mins
E-260/T180 260 mins
E-300 300 mins
NDEX REC.SPEED CLK/COUNT
2
1
4
5
1

Selecting the Cassette Type

:E180/
T120
:12H
:AUTO
:ON
END:(MENU)

Selecting the Recording Speed

NTSC
120 mins
160 mins
180 mins
PICTURE TIMER
STROBE AUDIO
3
ART INPUT
6

Protecting a Recorded Cassette

22
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2
Press the or button, until the cursor is placed in front of the
USER SET option.
3
Press the button to select this option.
Result: The cursor is set to the TAPE SELECT option.
4
Press the or
correct cassette length is displayed.
E180/T120
E 300
5
Press MENU twice to exit the menu.
You can record a cassette at two different speeds:
PAL/SECAM/MESECAM
SP (Standard Play)
LP (Long Play)
In Long Play or Super Long Play modes:
the recording is of a slightly lower quality.
To record a cassette:
in standard play mode
in long play mode
in super long play mode
Video cassettes have a safety tab to prevent accidental erasure.
When this tab has been removed, you cannot record on the tape.
1
If you wish to protect a cassette, break off the tab using a small
screwdriver.
2
To re-record over a protected cassette (safety tab broken), cover
the hole with adhesive tape.
button as many times as required, until the
E240/T160
E260/T180
NTSC/PAL-M
SP (Standard Play)
SLP (Super Long Play)
Press the REC.SPEED button on the
remote control, until:
SP is displayed.
LP is displayed (PAL/SECAM/MESECAM).
SLP is displayed (NTSC/PAL-M).