Using The Tape Counter - Samsung SV-5000W Owner's Instructions Manual

Using the Tape Counter
The tape counter:
€ indicates the elapsed time in the play and record modes
(hours, minutes and seconds) ;
€ is reset when a cassette is inserted in the VCR; and
€ enablesyoutofindthebeginningofasequenceeasily.
(_1" To enable the remaining time to be calculated correctly,
you must indicate the type of cassette being used, See
page 22,
1 Insert a cassette in your VCR.
Press CLK/COUNT twice,
Result: The tape counter is displayed:
0:00:00.
:_" The tape counter does not necessarily start from zero at the
beginning of the tape.
3 Select the required operation (play, record, fast-forward, rewind).
Result: The tape counter indicates how long the cassette has
been running.
4 To set the tape counter to zero at the beginning of a sequence:
press DISPLAY twice to display the counter ; and
press CLR/RST when you want to set the tape counter to
zero.
5 To fast-forward or rewind to the sequence at which the counter
was set to zero, simply press REW (<,1) or F.F (I,_).
Result: The VCR stops automatically when the counter
reaches zero.
Some VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 17).
Press DISPLAY:
t once to display the current function, program
number, recording speed, date, time and counter ;
t twice to display the counter only ;
t three times to display the time remaining on the
cassette ; and
t four times to clear the display.
IJ IJ IJ
37