Audio Dubbing A Pre-Recorded Cassette - Samsung SV-5000 Owner's Instructions Manual

GB
2
3
6
5
9
8
CLR/RST
0
0
5
REC
STOP
DISPLAY MONITOR
INPUT
REC
STOP
DISPLAY MONITOR
NPUT
REC
DISPLAY MONITOR
10
INPUT

Audio Dubbing a Pre-recorded Cassette

STROBE AUDIO
ART INPUT
CH
4
6
P/STILL
A.DUB
OUTPUT
P/STILL
A.DUB
7
OUTPUT
11
P/STILL
STOP
A.DUB
10
OUTPUT
44
With the Audio Dubbing function, you erase the previously
recorded sound and replace it with a new soundtrack from:
a CD player ;
a microphone connected to a sound system ; or
a cassette player.
Note:
Audio dubbing is applicable only to the linear audio track .
1
Connect an RCA audio cable to the appropriate output on your
sound system (CD/cassette player for example).
2
Connect the other end of the RCA audio cable to the audio input
connectors (L+R) on the front of your VCR.
3
Insert the pre-recorded video cassette on which the audio track is
to be replaced.
4
Select the LINE 1 input by pressing INPUT until L I is displayed.
5
Locate the point on the cassette at which you wish to start dubbing.
6
Press P/STILL ( ).
7
Press A.DUB.
Result: Your VCR is now in the Audio Dubbing Pause mode.
8
On the sound system, locate the point on the CD or cassette at
which you wish to start playback.
Example: The track that you wish to record on the cassette.
9
Press the pause button on your sound system.
10
When you are ready:
start playback on the sound system ; and
press REC or P/STILL ( ) on the remote control.
Result: The soundtrack is replaced on the pre-recorded video
cassette.
11
When you have finished recording, press STOP ( ).