Removing & Installing Body Components; Battery - Honda CB650FA 2016 Owner's Manual

Removing & Installing Body Components

Battery

Rubber strap
Battery
# Removal
Make sure the ignition switch is in the
Positive
position.
terminal
Remove the seat.
1.
Unhook the rubber strap from front side.
2.
Disconnect the negative - terminal from
3.
the battery.
Disconnect the positive + terminal from
4.
the battery.
Remove the battery taking care not to drop
5.
the terminal nuts.
#
Installation
Install the parts in the reverse order of removal.
Always connect the positive + terminal first.
Make sure that bolts and nuts are tight.
Make sure the clock information is correct after
the battery is reconnected.
Negative
For proper handling of the battery, see
terminal
"Maintenance Fundamentals."
"Battery Goes Dead."
(Off)
P. 60
2
P. 27
2
P. 49
2
P. 96
2
59