Changing Engine Oil/Filter - Honda CB650FA 2016 Owner's Manual

Changing Engine Oil & Filter
Changing the oil and filter requires special
tools. We recommend that you have your
motorcycle serviced by your dealer.
Use a new Honda Genuine oil filter or
equivalent specified for your model.
NOTICE
Using the wrong oil filter can result in serious
damage to the engine.
If the engine is cold, idle the engine for 3
1.
to 5 minutes.
Turn the ignition switch to the
2.
position and wait for 2 to 3 minutes.
Place your motorcycle on a firm, level
3.
surface.
Place a drain pan under the drain bolt.
4.
Engine Oil
Drain bolt
Remove the oil fill cap/dipstick, drain bolt,
5.
and sealing washer to drain the oil.
(Off)
Remove the oil filter with a filter wrench
6.
and let the remaining oil drain out. Make
sure the prior seal is not stuck to the
engine.
Discard the oil and oil filter at an
u
approved recycling centre.
Changing Engine Oil & Filter
u
Sealing washer
Continued 63