Ceiling Mounting With Straight Tube - ERNITEC Orion/2 Installation Manual

Installation Guide
4.3

Ceiling Mounting with Straight Tube

The straight tube is available in different length: 25 cm and 30 cm. The
supplied item is in the Dome Camera's package.
Items Needed:
•
Dome Camera
• Data Cable (supplied)
• Straight Tube and other equipped items (optional accessory
•
Water
• Screws
supplied
Tools Needed:
•
Tool for drilling
• Tool for screwing
Follow the steps to mount the Dome Camera with the straight t
1) Ensure t
straight tube.
2) Make a cable entry hole on the ceiling.
3) F ix the Straight Tube to the ceiling with proper screws and
(n
4) Attach the waterproof rubber to the straight tube.
5) Thread the cables through the straight tube and the top hold
6) Fix the top holder to the straight tube with the supplied screws and
washers. Then adjust the waterproof rubber to the junction of straight tube
and top holder.
7) Connect the cables to the Dome Camera. Then attach the Dome Camera
to the top holder and fix them with the supplied screw.
proof Rubber (supplied)
and Screw Anchors for fixing the straight tube onto the ceiling (not
)
hat the ceiling can support the weight of the Dome Camera and
ot supplied).
NOTE : After threading the cables, please block t
hole with the supplied sponge(s) to
www.ernitec.com
)
ube.
screw anchors
er.
he cable entry
avoid insects entering the tube.
27