Established Call Pickup - Samsung iDCS 100 User Instructions

Keyset
Hide thumbs Also See for iDCS 100:
Table of Contents

Advertisement

CONVENIENCE FEATURES
DO NOT DISTURB
Use this feature when you want to block calls to your keyset.
While on-hook, press the DND key or dial 401. The DND key lights
steady red to remind you of this mode.
To cancel DND, press the DND key again or dial 400. The DND light
turns off. You can make calls while in the DND mode.
NOTES:
1. If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the SPEAKER key.
2. If you place your keyset in DND mode and you do not have a DND key,
your TSI key will flash to indicate DND status.
ONE TIME DND
If you are on a call and you do not wish to be interrupted while on that call,
you can press the DND key and place your station in Do Not Disturb. When
you hang up at the end of the call, DND will be automatically canceled and
your keyset will be able to receive new calls. This feature requires a DND
key.
MUTE
You can mute the handset transmitter or the microphone during any conver-
sation:
Press the MUTE key. It will light red.
To resume speaking, press the MUTE button again. The light turns off.
BACKGROUND MUSIC
When a music source is supplied, you may listen to music through the
speaker in your keyset:
While on-hook, press the HOLD button to hear music.
Press the HOLD button again to turn music off.
You can set the level of background music by using the VOLUME keys while
listening to the music. This does not affect the speakerphone level.
36
HOME PAGE
Table of Contents

ESTABLISHED CALL PICKUP

[iDCS 500 L/LE VERSION]
To pick up an established call in progress at a single line extension con-
nected to a computer modem on your PC.
Press the EP key for that station on your keyset and the call is automat-
ically moved to your keyset.
The single line extension on your modem will be disconnected.
NOTE: You must have an assigned (EP key) button on your regular keyset,
for the single line station.
APPOINTMENT REMINDER/ALARM
CLOCK
This feature works like an alarm clock. Use it to remind yourself of an ap-
pointment later in the day (TODAY ONLY) or as a daily reminder every day
(DAILY). You can set up to three alarms. Each one can be either a TODAY
ONLY or a DAILY alarm.
When the alarm rings, you will hear three short rings repeated three times.
Lift the handset to answer the alarm. If you do not, the alarm will alert you
two more times at five minute intervals.
To set alarms:
Press TRANSFER and then dial 112.
Dial the alarm number 1, 2 or 3.
Dial the time at which you want the alarm to sound. Enter the time as
HHMM (hours and minutes) using the 24 hour clock.
Dial 0 (NOT SET), 1 (TODAY ONLY) or 2 (DAILY) to select the alarm type.
Press TRANSFER to save.
Repeat for each alarm if needed.
To cancel individual alarms:
Press TRANSFER and then dial 112.
Dial alarm number 1, 2 or 3.
Press the HOLD key.
NOTE: Display keysets can show a reminder message.
er Messages under Display Features.
Guide-Contents
See Alarm Remind-
37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Idcs 28dIdcs 18dIdcs 8dIdcs 64b aomIdcs 14b

Table of Contents