Startup (Internal Combustion Models) - Graco DutyMax EH230 Operation, Parts

Startup (Internal Combustion Models)

Startup (Internal Combustion Models)
1. Place displacement pump in grounded
metal pail partially filled with flushing
fluid. Attach ground wire to pail and to
earth ground.
2. Turn prime valve down to DRAIN
position. Turn pressure control
counterclockwise to lowest pressure.
3. Set hydraulic pump valve OFF.
20
ti9692a
ti9686a
4. Start a gasoline engine, see step 5. Start
a Diesel engine, see step 6.
5. Start gasoline engine:
a. Move fuel valve to open.
ti5248a
b. Move choke to closed.
ti5249a
c. Set throttle to fast.
ti5250a
d. Set engine switch to ON.
ti5262a
334606E