Table of Contents
Advertisement
Ilumen
iLumen offers an optional timer unit that can be purchased via our commercial department.
Installation of this timer is made very easily. On the back of the timer there is an adhesive strip,
so the module can be attached to about all surfaces. The module has only two wires, one for the
connection with the PIDbox and the other for the connection with the AC cable.
6.3 O
PID
PENING AND CLOSING THE
BOX
There are 2 lids that can be opened up for hooking up the PIDbox.
To open the bottom lid unscrew the 10 screws located on the front side of the PIDbox. To close
place the lid back on the PIDbox. Screw in all the screws. Do not over tighten the screws
otherwise the screws and lid can be damaged.
To open the front lid unscrew the 8 screws located on the front side of the PIDbox. To close place
the lid back on the PIDbox. Screw in all the screws. Do not over tighten the screws otherwise the
screws and lid can get damaged.
9
Installation Manual Ilumen PIDbox v2.5
Advertisement
Table of Contents
