Table of Contents
Advertisement
Ilumen
2.2 Q
UALIFICATIONS OF SKILLED PERSONS
The work described in this document must be performed by skilled personnel only. Skilled
personnel must have the following qualifications:
✓ Knowledge of how an inverter works and how it is operated
✓ Training in how to deal with the dangers and risks involved in installing and operating
electrical devices and plants
✓ Training in the installation and commissioning of electrical devices and plants
✓ Knowledge of all applicable standards and directives
✓ Knowledge and observance of this document and all safety precautions
2.3 S
AFETY PRECAUTIONS
2.3.1 E
LECTRIC SHOCK
When the Ilumen PIDbox is in operation, voltage will be present. Prior to
maintenance work on the PV plant switch off the inverter and then the PIDbox.
When you want to change the arrangement of the Ilumen PIDbox you must switch
off the Ilumen PIDbox 20 minutes prior to making any changes.
2.3.2 E
LECTROSTATIC DISCHARGE
Never operate the Ilumen PIDbox when not properly installed or when the
components are not closed properly. Always make sure the grounding of the
Ilumen PIDbox is done correctly.
3 S
COPE OF DELIVERY
1x Ilumen PIDbox
Containing the following components
a. 1x iLumen PID controller
b. 1x front acces panel
c. 1x bottom access panel
d. 1x AC-connector
e. 1x LED indicator
f.
Installation manual
4 P
RODUCT DESCRIPTION
The Ilumen PIDbox is placed between the inverter and the solar array strings. The power of the
strings goes through the PIDbox, entering on one side "PV in" and leaving on the other "Inv. out".
This means the Ilumen PIDbox is placed in series between the PV panels and the inverter. You
can use one Ilumen PIDbox per 1 MPP tracker.
Installation Manual Ilumen PIDbox v2.5
5
Advertisement
Table of Contents
