Table of Contents
Advertisement
Ilumen
5 M
OUNTING
5.1 M
OUNTING LOCATION REQUIREMENTS
✓ The installation site must be freely and safely accessible at all times without the
necessity for any auxiliary equipment.
✓ The mounting location should be placed in a well ventilated location.
✓ Do not place the Ilumen PIDbox in a dusty environment.
✓ The ambient temperature must be between -10 and 40°C.
✓ Normally the PIDbox is installed right next the inverter or close to the DC-combiner box.
✓ Always mount the PIDbox in an upright position.
Install the PIDbox on a flat surface to avoid stress on the mounting brackets.
Install the PIDbox always in a shaded area. Prevent from installation in a dusty
environment.
The device must be mounted on a vertical wall. Never install the device flat on the
floor.
5.2 M
OUNTING THE
1. Mark the 4 positions of the drill holes on the mounting surface
Installation Manual Ilumen PIDbox v2.5
I
PID
LUMEN
BOX USING THE MOUNTING HOLES
3
4
1
2
6
Advertisement
Table of Contents
